Gerber Panelizer
Puts several boards, or many copies of one board, onto a panel: held by tabs with mouse bites or separated by V-score, with a frame, fiducials and tooling holes. The result is a ZIP with Gerber and Excellon files for the board house. Your files stay in your browser.
Panel
Add the Gerber files of a board: a ZIP as it goes to the board house, or the single files together.
The picture is drawn from the files in the download, read back with the parser of the Gerber Viewer.
Good to know
- Files: Gerber RS-274X and X2 from KiCad, EasyEDA, Eagle, Altium and others, with Excellon drill files. The layers are found by name and by the X2 attributes; plated and not plated holes stay apart. Inner layers of multilayer boards are kept.
- Tabs join the boards with each other and with the frame across the milled gap. The board house mills along the outline, which runs around boards, tabs and frame. 2 mm spacing is what most board houses mill.
- Mouse bites are rows of small holes where a tab meets a board, so it breaks cleanly. "Into board" moves them a little inside the board edge, so nothing is left standing out after breaking.
- V-score needs rectangular boards of the same size: the board house cuts V-grooves from both sides along straight lines. Ask your board house which layer it wants the score lines on.
- Frame: rails for handling and for the assembly machine, with fiducials (bare copper dots) and tooling holes.
- Ordering: board houses often count each design on a panel and may charge extra for panels made by the customer; check their rules before you order.