WCH RISC-V Programmer

Flash WCH RISC-V microcontrollers with a WCH-LinkE (or WCH-LinkW/-LinkB) straight from the browser: write BIN and HEX files, erase, unlock and unbrick chips. Supports the CH32V00x, CH32M007, CH32V103, CH32V20x, CH32V30x, CH32V317, CH32V4xx, CH32H41x, CH32X03x, CH32X3x5, CH32L103, CH32M103, CH32M030, CH641/643/645 and CH565/569, CH57x/58x/59x.

Firmware

    Flashing writes and verifies the firmware. A locked chip is unlocked first, which erases it.

    Chip

    Connects to the chip and shows its type and flash size.

    Erases the whole code flash.

    Removes the read protection. This erases the chip.

    Power-cycle erase for chips that no longer respond, for example after a program disabled the debug pins.

    More options

    Sets the read protection. Reading the flash is then impossible until the chip is unlocked (and erased).

    CH32V00x and CH32M007 only: use the reset pin PD7 as a normal I/O pin.

    CH32V00x and CH32M007 only: make PD7 the reset pin again.